AK029 XD004 1PCS Wireless Key Fob 4PCS DC12V 1 Chanel Receiver Relay Modules 433.92MHZ

AK029 XD004 1PCS Wireless Key Fob 4PCS DC12V 1 Chanel Receiver Relay Modules 433.92MHZ

  • Model: AK029*4+XD004
  • Availability: In stock
  • Weight: 0.15Kg
US$25.99
  • Description
  • Technical Documents
  • Guidance videos
  • Reviews
  • Shipping & Returns

 

QTY:1 pcs remotes and 4 pcs Receiver Controller . ( This remote doesnot have a battery inside)
 
 

Technical indicators:

1.operating voltage: DC 12V ;       

2.working frequency:433.92MHz;
3:Maximum load: 1000 watts;
4:PCB Size:41×20×15mm;
5: Momentary Mode ,Latch Mode  , Toggle Mode can be adjustable by slodering back side.
6. Pls connect the receiver modules properly before power supply ;
8: Momentary Mode ,Latch Mode  , Toggle Mode can be adjustable by jumper .
9. Pls connect the receiver modules properly before power supply ;
10: 1 chanels;
11: Learning function (can works with EV1527 and PT2262 remote , can store 16 pcs different code remote );


 
 
Advantage :
1:  Receiver Mother board have a learning key , if the remote is lost , must buy EV1527 Learning remotes to re-learn;

 

Output:

A.singnal Inter-locking (Latch)----connect 2  and 3 ;

B.singnal Self-locking (Toggle) ---- connect 1 and 2 ;

C.singnal Non-locking (Momentary ) ---- All disconnect  ;

·         Toggle : Press->On; Press again->Off ;

·         Latched : Press->On; Press other button->Off ;

·         Momentary : Press and hold->On; Release->Off ; 

Relay mode :

Normally close (NC ) ;
Normally open (NO ) ;
  • Normally-open (NOcontacts connect the circuit when the relay is activated; the circuit is disconnected when the relay is inactive. It is also called a Form A contact or "make" contact. NO contacts may also be distinguished as "early-make" or NOEM, which means that the contacts close before the button or switch is fully engaged.
  • Normally-closed (NC) contacts disconnect the circuit when the relay is activated; the circuit is connected when the relay is inactive. It is also called a Form B contact or "break" contact. NC contacts may also be distinguished as "late-break" or NCLB, which means that the contacts stay closed until the button or switch is fully disengaged.

Learning method and steps

1.       Keep pressing learnig key on receiver board , release the button when LED is off , enter the learning state ;

2.       Press any key on remote control within 5 seconds , LED flash 3 times and then turn on , then it have success in learning .

Clear the deposit information

Keep Pressing Learning Key , LED turns off , Wait 10 Seconds , LED turn on , that deposited information has been successfully cleared ;

Transmitter :
 

 

 

 

 

 

 

 
Feature: 
1. Four buttons;
2. High stability, SMT chip, frequency stabilization SAW, 6.5G ultra-high-frequency transistor;
 

 

Technical Data :
 
 Power supply : 12V 23A battery  replacable .(This remote doesnot have a battery , Please buy in your local market )
Operating current: ≤ 9mA;
Decode Type : land or pad;
Oscillation mode: SAW resonator;
Modulation mode:ASK;
Operating frequency:433.92MHZ ;
Encoding IC : Fixed code SC2262(Compatiable PT2262、PT2264) ;
(CANNOT program , HAVENOT Learning Function , Cannot copy your existing remote ,Can be duplicate if your receiver board have a learning key ) ;
RC  Resistance : 4.7M;
Remote size: 58×39×16 mm;
 
Typical Applications
• Automotive alarm systems 
• Automotive RKE systems
• Automotive immobilizers
• Gate and garage door openers 
• Identity tokens
• Burglar alarm systems
Wiring Diagram 1:
DC 12V control circuit,Wiring diagram below. "LOAD" may be LED lights, fans, motors and other DC 12V
 

 

 

Wiring Diagram 2:

DC 1-48V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). "LOAD" may be LED lights, fans, motors and other DC AC equipment

 

Choose a ranking for this item. 1 star is the worst and 5 stars is the best.





NOTE: HTML tags are not allowed.
NOTE: Reviews require prior approval before they will be displayed

* Delivery Time.
We need 1-2 days to process your order before shipping.There are two shipping methoed. Fast Delivery: The delivery time for US, European countries the delivery will take 3-5 days.Slow Delivery: The delivery time for US, European countries the delivery will take 10-15 days.
* Tracking information.
After we ship package, customer receive automatic email with tracking details.
* Lost Package Policy.
If a package did not arrive in 4 weeks after the shipping date, then this package is treated as Lost. In this case a new package will be shipped to the customer provided we are able to give the same items as those purchased by the customer. If we are not able to provide the same items to substitute the lost ones we will either propose to the customer similar items or refund their cost as it will be mutually agree with the customer. If one or more items neither the same nor similar are available to be shipped, the customer can request to cancel the order entirely, thus the total cost of the order including shipping and handling cost will be fully refunded.

payment
Copyright © 2024 jinyiet.com All Rights Reserved.